For screen reader problems with this website, please call320-217-58773 2 0 2 1 7 5 8 7 7Standard carrier rates apply to texts.

Audio Video Extremes

Audio Video Extremes

320-217-5877

JVC DLA-VS4010NLG D-ILA Projector

Model #: DLA-VS4010NLG

At a Glance

The DLA-VS4010NLG is an advanced 4K2K projector incorporating three 1.27-inch (Diag.) 4K2K D-ILA display devices. It produces extremely high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design and monitoring facilities. Its Blu-Escent™ solid state laser-phosphor light source delivers 6,000 ANSI lumens with a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low operating cost, the DLA-VS4010NLG achieves ultra-high resolution of approximately 10 megapixels (4,096 x 2,400), which is five times that of full HD.

WarningProposition 65 Warning for California Residents
JVC DLA-VS4010NLG D-ILA Projector

Light Source

Blu-Escent Laser-Excited PhosphorYes
2-Step Power Control (2 customizable modes)Yes
Adjustable Power 20%-100% (88 steps)Yes
Auto Intensity mode capableYes
Light Source LifeAverage 20,000hrs at 100% output

General Specs

Product Weight (lbs.)162
Depth (in.)36.8
Width (in.)26
Height (in.)13.5
Lamp Life20000
Brightness6000 ANSI Lumens
Manufacturer Warranty1 Year Parts & Labor
Projector Brightness6000

General

Image Device3 D-ILA® devices (1.27 inches diagonal), 4096 x 2400, 6.8um Pixel Pitch, 0.25um Pixel Gap, >93% Aperture Ratio
Brightness6000 ANSI Lumens
Display Resolution4096 x 2400 Pixels (17:10 Aspect Ratio)
Contrast RatioGreater than 10,000:1 (Sequential)
UniformityGreater than 85%
DVI Input-Supported Resolutions4096x2400, 4096x2160, 3840x2400, 3840x2160, 2048x1200, 2400x1080, 1920x1080, 1920x1200, 1600x1200, 1280x1024, 1024x768, 800x600, 640x480
DVI Clock165MHz (single link), 330MHZ (dual link)
Latency<10ms in 4-stripe mode
Color Bit Depth8 bits maximum single link DVI, 12 bits maximum dual link DVI
I/O TerminalsDVI-D (dual link) x 4, Ethernet, RJ45 x 1, USB, Type B (slave) x 1, RS-232C, D-Sub 9 pin (male) x 3
Remote ControlIntegrated Web Browser Interface, RS-232C Fully featured control protocol
Projection Lens (Optional)GLMS4011SG - 1.1:1 Fixed lens, ±25% V offset, GLMS4015SZG - 1.5-1.84:1 Zoom lens,±50% V and ±25% H offset, GLMS4021SZG - 2.15-3.65:1 Zoom lens,±50% V and ±25% H offset
Power RequirementAC 100V-120V, 200V-240V, 50/60Hz (single phase)
Power Consumption1250 Watts Maximum, 11.5A/5.75A, AC 110V/240V
Noise Level(0-26°C, 32- 52.3dB (A) at 39.4”/1m (3.3ft)
Operating Altitude<6600ft (2000m) for safe operation, <4900ft (1500m) for guaranteed performance
Installation OrientationVertical ±90
Airflow Requirements106cfm (3m3) per minute minimum
Dimensions ( W x H x D )26.0” x 13.5” x 36.8” (660 x 342 x 934 mm)
Weight162lbs/73.5kg, Without Lens
Supplied AccessoriesPower Cord *Instruction manual is available from the JVC site
WarrantyOne-Year Parts and Labor (per JVC Limited Warranty)

JVC DLA-VS4010NLG D-ILA Projector

Model #: DLA-VS4010NLG
203433
JVC

See Price in Cart

At a Glance

The DLA-VS4010NLG is an advanced 4K2K projector incorporating three 1.27-inch (Diag.) 4K2K D-ILA display devices. It produces extremely high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design and monitoring facilities. Its Blu-Escent™ solid state laser-phosphor light source delivers 6,000 ANSI lumens with a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low operating cost, the DLA-VS4010NLG achieves ultra-high resolution of approximately 10 megapixels (4,096 x 2,400), which is five times that of full HD.

Get to know this product.

The DLA-VS4010NLG is an advanced 4K2K projector incorporating three 1.27-inch (Diag.) 4K2K D-ILA display devices. It produces extremely high-quality images for use in planetariums, museums, simulators, and medical institutions, as well as high-spec design and monitoring facilities. Its Blu-Escent™ solid state laser-phosphor light source delivers 6,000 ANSI lumens with a stunning 10,000:1 native contrast ratio. Combining superb definition and resolution with low operating cost, the DLA-VS4010NLG achieves ultra-high resolution of approximately 10 megapixels (4,096 x 2,400), which is five times that of full HD.

The projector can simultaneously display two or four screens in WUXGA (1,920 x 1,200) resolution. Multi-screen projection is facilitated by four DVI (Dual-Link) input terminals supporting an array of PC input formats. The DLA-SH7NLG also offers a low latency mode for simulation environments.

The DLA-VS4010NLG's laser-phosphor illumination system is based on JVC's proprietary Blu-Escent™ technology. The light engine uses blue laser diodes, a stationary inorganic phosphor and JVC's color management system. BLU-Escent™ enables a powerful 6,000 lumen light output and more than 20,000 projection hours. Using Laser Diodes as the light source, light output can be controlled instantly enabling a contrast ratio of ∞:1. The projector controls the laser output accordingly to the scene's brightness, which creates a picture that is as close to human perception as possible. Power is adjustable from 20-100% in 88 steps.

Its well though-out design offers operational flexibility, including the ability to stack two projectors for 3D images or installation on a ±90-degree tilt. The DLA-VS4010NLG weighs about 162 pounds, excluding lens.

Three different lenses are available, including short-focus and telescopic models

The DLA-VS4010NLG operates on normal AC 100-220V power and consumes less than 1,250 watts. Convergence is adjustable to 1/10 pixel accuracy via GUI control; three gamma tables are included. Six test patterns, including a crosshatch and color bars, enable image adjustment without external signal sources. Projection configuration data is easily stored and uploaded from a USB memory device. The Ethernet-compatible DLA-VS4010NLG can be configured via a PC Web browser, and multiple projectors are networkable for operation via a single PC.

Main Features:

Solid State Laser-Phosphor Illumination System

4096x2400 Pixels, 11% more Vertical Resolution & Pixels than other 4K devices

3 Active Matrix D-ILA Devices(1.27? Diag)

Light Output: 6000 ANSI Lumens

Contrast Ratio - 10,000:1 (typical)

RGB Convergence in 1/10 pixel increments

Input via 4xDVI-D, Single/Dual Link

Communication - 100BaseT Ethernet, RS-232C, USB

Noise Level 52.3dB (A) at 39.4?/1m (3.3ft) (32-79°F, 0-26°C )

Net Weight (less lens): 162lbs/73.5kg

Applications

Simulation

Immersive Displays (such as CAVE)

Planetariums

Theme Parks

Staging/Rental

Ultra-high Resolution Command/Control

Ultra-high Resolution Medical Imaging

Advanced Visualization and 3D display

Useful Documents
Specifications

General Specs

Product Weight (lbs.)162
Depth (in.)36.8
Width (in.)26
Height (in.)13.5
Lamp Life20000
Brightness6000 ANSI Lumens
Manufacturer Warranty1 Year Parts & Labor
Projector Brightness6000

General

Image Device3 D-ILA® devices (1.27 inches diagonal), 4096 x 2400, 6.8um Pixel Pitch, 0.25um Pixel Gap, >93% Aperture Ratio
Brightness6000 ANSI Lumens
Display Resolution4096 x 2400 Pixels (17:10 Aspect Ratio)
Contrast RatioGreater than 10,000:1 (Sequential)
UniformityGreater than 85%
DVI Input-Supported Resolutions4096x2400, 4096x2160, 3840x2400, 3840x2160, 2048x1200, 2400x1080, 1920x1080, 1920x1200, 1600x1200, 1280x1024, 1024x768, 800x600, 640x480
DVI Clock165MHz (single link), 330MHZ (dual link)
Latency<10ms in 4-stripe mode
Color Bit Depth8 bits maximum single link DVI, 12 bits maximum dual link DVI
I/O TerminalsDVI-D (dual link) x 4, Ethernet, RJ45 x 1, USB, Type B (slave) x 1, RS-232C, D-Sub 9 pin (male) x 3
Remote ControlIntegrated Web Browser Interface, RS-232C Fully featured control protocol
Projection Lens (Optional)GLMS4011SG - 1.1:1 Fixed lens, ±25% V offset, GLMS4015SZG - 1.5-1.84:1 Zoom lens,±50% V and ±25% H offset, GLMS4021SZG - 2.15-3.65:1 Zoom lens,±50% V and ±25% H offset
Power RequirementAC 100V-120V, 200V-240V, 50/60Hz (single phase)
Power Consumption1250 Watts Maximum, 11.5A/5.75A, AC 110V/240V
Noise Level(0-26°C, 32- 52.3dB (A) at 39.4”/1m (3.3ft)
Operating Altitude<6600ft (2000m) for safe operation, <4900ft (1500m) for guaranteed performance
Installation OrientationVertical ±90
Airflow Requirements106cfm (3m3) per minute minimum
Dimensions ( W x H x D )26.0” x 13.5” x 36.8” (660 x 342 x 934 mm)
Weight162lbs/73.5kg, Without Lens
Supplied AccessoriesPower Cord *Instruction manual is available from the JVC site
WarrantyOne-Year Parts and Labor (per JVC Limited Warranty)

Light Source

Blu-Escent Laser-Excited PhosphorYes
2-Step Power Control (2 customizable modes)Yes
Adjustable Power 20%-100% (88 steps)Yes
Auto Intensity mode capableYes
Light Source LifeAverage 20,000hrs at 100% output
WarningProposition 65 Warning for California Residents